Pipeline Inline Inspection Tools
Pipeline Inline Inspection Tools are multiple inspections have been conducted on pipelines both domestically and internationally, and the minimum detected defect depth of this product is better than 5% of the pipe wall thickness. It has met the user's requirements in terms of detection rate, detection accuracy, and confidence, and can replace similar advanced products abroad.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Core advantages:
40% deformation capacity significantly expands the range of detectable pipelines; In pipelines that can undergo routine testing, due to the limited deformation capacity of the testing equipment (generally with a deformation amount of 15% OD or even smaller), it is necessary to strictly select the corresponding diameter testing equipment for different diameter pipelines for operation. There are more than 20 specifications of testing equipment for full diameter coverage (159mm-1422mm). By using the multi caliber adaptive pipeline internal testing technology of Shenyang Instrument Institute, it is possible to perform internal testing operations on large variable diameter pipelines. Each type of detector should meet at least three diameters for pipeline inspection, saving a lot of costs for inspection parties or pipeline operators.
Product specification
|
Pressure range： |
0-10MPa |
|
Working temperature range: |
-10~80 ℃ |
|
Bending ability: |
The curvature radius of the elbow can be greater than or equal to 1.5DN |
|
Deformation ability: |
deformation ability through straight pipe section ≤ 20% OD |
|
Working hours: |
Continuous working time of more than 60 hours |
|
Detection threshold: |
feature distance to nearest circumferential weld ± 0.1m; circumferential direction: ± 5 ° |
Product details
Photos of Pipeline Inline Inspection Tools
Application:
The device has been tested and verified on a 25% deformed submarine pipeline and Turkmen gas pipeline in the national pipeline network. One device operates in three different calibers without affecting the detection rate, accuracy, and confidence.
Packaging and delivery
Packing: by container or as customers's required.
Delivery: deliver to major ports in your country.
FAQ
Q: Deployment efficiency?
A: Support rapid deployment (such as Piper tools) without the need for professional team intervention, reducing single task costs by 60%.
Wireless portable design (such as M18 modular system), suitable for narrow or complex terrain pipelines.
Q: Maintenance suggestions?
A: Regularly calibrate sensor sensitivity and clean lens or probe surface residues.
Equipment anti-corrosion treatment is required after working in high-temperature or corrosive environments.
Q: Testing frequency requirements?
A: According to industry standards, it is recommended to inspect high-risk pipelines at least once a year, and low-risk scenarios can be extended to 2-3 years.
Q: Does it support non-metallic pipelines?
A: The current technology mainly targets metal pipelines (steel, alloys, etc.), and non-metallic materials need to be combined with other technologies (such as sonar imaging).
Hot Tags: pipeline inline inspection tools, China pipeline inline inspection tools manufacturers, suppliers, factory
No Information
